Osmosi inversa industriale IDDMO-16 produce 16m3/h

Breve descrizione

Il sistema Osmosi inversa industriale Ecosoft MO-16 produce 16m³ /h.
Durante il trattamento l'acqua viene divisa in 2 flussi all'interno del modulo a membrana (acqua demineralizzata, o permeato, e acqua di concentrato).
Il concentrato viene scaricato e parte di esso viene inviato all'ingresso di una pompa ad alta pressione per riciclare il concentrato il tasso di riciclo consente il controllo del volume di scarico del concentrato. Il riciclo può essere regolato per ottenere una percentuale di permeato fino al 75%, L'automazione del sistema fornisce protezione alla pompa contro il funzionamento a secco, protezione delle membrane da alta pressione.
Industrial reverse osmosis system Ecosoft MO— 16 with a capacity of 16 m³/h is intended for demineralization of salts containing water. The process of demineralization is carried out with Dow Filmtec™ (USA) reverse osmosis membrane element.
During the treatment the water is divided into two flows inside the membrane module of the system: demineralized water, or permeate, and water with increased salt content, i.e. concentrate. The concentrate is discharged into the sewage system while the module is operating, and part of it is sent to the inlet of a high-pressure pump, to recycle the concentrate. The recycle rate enables control of the volume of concentrate discharge. The recycle can be adjusted to achieve a permeate rate up to 75%.
The system automation provides protection of the pump against dry running, protection of the membranes from high pressure, ensures the system is switched on and off according to the level of permeate in the permeate tank, and automatically performs hydraulic flushing of the membranes with feed water or permeate.
Key advantages:High quality of the components and thorough engineering approach
Energy saving with the application of Dow Filmtec™ XLE membrane element and Grundfos pump
Individual engineering evaluation for every project
Variable parameters of operation due to availability of control valves
Manufacturing process is certified according to the ISO 9001:2009 standard
Produced since 1999
CE marked and confirmed to be safe in accordance with the EU new approach directives